Home Automation General Overview

Welcome to your automated home! No longer will you be wasting energy, stubbing your toe while walking in the dark, or saying to yourself while sitting on the couch "I wish I had some good music to listen to". Your home automation system will solve these, and 642 other problems.

A home automation system starts with the home controller. This is the device that is responsible for integrating the various subsystems (lighting, audio, climate control, etc). It also holds all of our advanced programming and configuration.

When you press "Good Night" on your touch screen, the main panel that tells the lights and audio system to slowly turn off, thermostats to adjust, and security system to arm.

---

Home Automation Demo House

This module (produced by HAI) gives an excellent tour of a fully automated home.

Of course here at Mile High Automation we are always pushing the boundaries of what these systems can do. Our custom programming and advanced integration products give you even more than what is shown in the demo.

---

FAQs

What controls the system? Is it a computer?

Either the Omni Pro II or the Omni IIe controls the entire home automation system. No computer is required to control the home. Many automation systems run off a central computer and since they have moving parts, they often need to be replaced after 5-10 years. Our automation controllers are built to last for life.

Can the touch screen arm/disarm the security system?

Yes, the touch screen is able to control all aspects of the home automation system.

What happens if the power goes out?

The system includes a battery backup that will power the system for 1-6 hours depending on the number of devices connected to the system. After that, the system will shut off. When power is restored, the system will instantly come back online. The only information that is lost is the current time. All other configuration is stored in its memory.

Where is the panel installed?

The Automation Controller is typically installed in a basement or closet. It can either mount inside a structured wiring panel or we'll ship it out in its own enclosure.

Can this system integrate with my current security system (ADT, Brinks, etc)?

Our automation panels have a full security system built into them. Because of this, we cannot integrate with your current alarm panel. However, we can use all of the same security contacts; all you need to do is move the wires from your current panel to our automation panel.

What are the monthly fees?

$0. Out of the box, our system is self-monitored, which means the system can call you in case of a fire or break in. If you prefer to have your security system professionally monitored, we have packages starting at $22/mo.

Can I control my home while on vacation?

Yes, our systems can be controlled by either a phone or Windows-based computer.