The Offical Mile High Automation Blog
Subscribe to our RSS feed
How To Setup Remote Access - Part 3: HAI Snaplink
By now you have setup port fowarding in your router and implemented a DDNS system. Now we are going to configure your HAI Snaplink software to allow you to log into your home automation system from anywhere in the world.
Step 1: Open Snaplink and EDIT the controller file. If you are prompted for a password, enter "password" (and then change it!).
Step 2: Enter you account settings.
Step 1: Open Snaplink and EDIT the controller file. If you are prompted for a password, enter "password" (and then change it!).
Step 2: Enter you account settings.
- IP Address or Domain Name: This is your DDNS domain name (ex: myhome.homeip.net).
- Port Number: Always 4369
- Encryption Keys 1 & 2: If you purchased the system from us this will automatically be filled in. If not, go to your touch screen and hit System, Setup, System Setup, Enter Code, 6 (Misc), and scroll down to the encryption keys.
- User Code: The 4-digit code you use to arm/disarm the system.
- Click Save.
Step 3: Hit the connect/disconnect button on the top right and you will connect to your system. Enjoy!
Labels: HAI, home automation, how to, remote access, setup, snaplink
-
Josh Ferguson
Posted
Tuesday, February 9, 2010
at
11:59 PM
0 Comments:
Post a Comment