The Offical Mile High Automation Blog
Subscribe to our RSS feed
How To Setup Remote Access - Part 1: Port Forwarding
The following guide will show you how to set up port fowarding on your router. This will allow us to connect to your system to make changes, as well as allow you to access your system over the internet.
Step 1: Login to Router
Open Internet Explorer and type 192.168.1.1 into your address bar. A login window will pop up. Enter your user name and password. By default the user name and password are "admin" and "admin". If 192.168.1.1 does not work, try 192.168.0.1. Some routers default to the .0.1 subnet.
Step 1: Login to Router
Open Internet Explorer and type 192.168.1.1 into your address bar. A login window will pop up. Enter your user name and password. By default the user name and password are "admin" and "admin". If 192.168.1.1 does not work, try 192.168.0.1. Some routers default to the .0.1 subnet.
Step 2: Set up Port Forwarding
Click on the "Applications & Gaming" Tab. Under Port Range enter the following values:
- Application: HAI
- Start: 4369
- End: 4369
- Protocol: Both
- IP Address: 155
- Enabled: Checked
Labels: how to, port forwarding, remote access, router configuration, tutorials
-
Mile High Automation
Posted
Tuesday, February 9, 2010
at
11:44 AM
0 Comments:
Post a Comment